设为首页
收藏本页
 
网站首页>> 焊接词典
焊接专业英语词汇(压焊:电阻焊、摩擦焊、爆炸焊、扩散焊、超声波焊等)
电阻焊  resistance welding (RW)
点焊  spot welding; resistance spot welding
凸焊  projection welding
缝焊  seam welding
滚点焊  roll-spot welding
连续点焊  stitch welding
多点焊  multiple spot welding
手压点焊  push welding; poke welding
单面点焊  indirect spot welding
双面点焊  direct spot welding
脉冲点焊  pulsation spot welding; multiple-impulse welding
焊接网 www.Hanjie.com
串联点焊  series spot welding
多点凸焊  multiple projection welding
频道进缝焊  step-by-step seam welding
压平缝焊  mash seam welding
串联缝焊  series seam welding
对接缝焊  butt seam welding; foil-butt seam
电阻对焊  upset butt welding
闪光对焊  flash butt welding (FBW)
储能焊  stored energy welding
电容储能点焊  condenser discharge spot welding
高频电阻焊  high frequency resistance welding
冲击电阻焊  percussion welding
胶接点焊  spot weld-bonding; weld-bonding
闪光  flashing; flash
过梁  bridge; lintel
顶锻  upsetting; upset
夹紧力  clamping force
顶锻力  upsetting force; upset force
电极压力  electrode force; electrode pressure
电极滑移  electrode skid
焊接循环  welding cycle
预压时间  squeeze time
锻压时间  forge-delay time; forge time
焊接通电时间(电阻焊) welding time (resistance welding)
预热时间  preheat time
加热时间  heat time
冷却时间  cool time
间歇时间  quench time; chill time
回火时间  temper time
维持时间  hold time
休止时间  off time
闪光时间  flash time; flashing time
顶锻时间  upset time; upsetting time
有电顶锻时间  upset current time
无电顶锻时间  upset current-off time
闪光速度  flashing speed
闪光电流  flashing current; flash current
顶锻电流  upset current
预热电流  preheat current
回火电流  temper current
调伸长度  initial overhange; extension
闪光留量  flash allowance
顶锻留量  upset allowance
顶锻速度  upset speed
电极接触面  electrode contact surface
贴合面  faying surface
焊点  welding spot
熔核  nugget
熔核直径  diameter of nugget
塑性金属环区  corona bond
焊透率  penetration rate
压痕  indentation
压痕深度  depth of indentation
压深率  indentation ratio
翘离  sheet separation
缩孔  shrinkage cavity
胡须  intrusion
电极粘损  electrode pick up
喷溅  splash/ expulsion
毛刺  fin
飞边  upset metal/ fin
焊点距  weld spacing/ spot weld spacing
边距  edge distance
分流  shunt current
接触电阻  contact resistance
电阻焊机  resistance welding machine
点焊机  spot welding machine
多点焊机  multiple spot welding machine
移动式点焊机  portable spot welding machine
缝焊机  seam welding machine
纵横两用缝焊机  universal seam welder
对焊机  butt resistance welding machine
凸焊机  projection welding machine
三相低频焊机  three phase low frequency welder
二次整流电阻焊机  direct current resistance welder secondary rectification
电容储能电阻焊机  condenser discharge resistance welder
电容储能点焊机  condenser type spot welder/ capacitor spot welding machine
工频电阻焊机  mains frequency resistance welding machine
低频电阻焊机  frequency converter resistance welding machine
高频焊机  high frequency induction welder
逆变式电阻焊机  inverter type resistance welding machine
全波阻焊电源  full wave resistance welding power source
斩波阻焊电源  chopped wave resistance welding power source
旋转焊接变压器  rotary welding transformer
C形点焊钳  C-type welding head/ C-type gun
X形点焊钳  pincer spot welding head/ pliers spot welding head
断续器  contactor
同步断续器  synchronous contactor
异步断续器  non-synchronous contactor
程序控制器  sequencer( 焊接网 www.Hanjie.com
程序时间调节器  sequencer timer
 
电极臂  arm
电极握杆  electrode holder
电极台板  backup die/ bolster
电极水冷管  electrode cooling tube
电极头  electrode tip
电极帽  electrode cap
锥头电极  truncated tip electrode
平头电极  flat tip electrode
尖头电极  pointed tip electrode
球面电极  radius tip electrode
偏心电极  offest electrode
直电极  straight electrode
弯电极  cranked electrode
双弯电极  double cranked (swannecked) electrode
滚轮电极  circular electrode/ welding wheel
斜棱滚轮电极  bevelled wheel
顶锻机构  upsetting mechanism
电极总行程  total electrode stroke
工作行程  operational stroke
辅助行程  electrode travel/ electrode stroke
臂间距离  horn spacing/ throat opening
电极臂伸出长度  arm extension
摩擦焊  friction welding (FW)
转速  friction speed
摩擦压力  friction pressure/ heating pressure
摩擦时间  friction time
摩擦变形量  burn-off length
摩擦变形速度  burn-off rate
停车时间  stopping time
顶锻变形量  forge length
顶锻变形速度  forge rate
摩擦表面  friction surface
储能摩擦焊  fly-wheel type friction welding
径向摩擦焊  radial friction welding
扩散焊  diffusion welding (DW)
过渡液相扩散焊  transient liquid phase diffusion welding
热等静压扩散焊  hot isotatic pressure diffusion welding
热轧扩散焊  roll diffusion welding
扩散缝焊  seam diffusion welding
超塑成形扩散焊  supperplastic forming diffusion bounding
隔离剂  buttering material
爆炸焊  explosive welding (EW)
爆炸点焊  explosive spot welding
爆炸线焊  explosive line welding
多层板爆炸焊  explosive welding of multiplayer plates
多层管爆炸焊  explosive welding of multiplayer tubes
覆板(覆管)  cladding plat (tube)/ flyer plate (tube)
基板(基管)  base plate(tube)/ parent plate (tube)
保护层  buffer/ protector
基础  base
预置角  preset angle
间距  initial stand-off/ spacing
装药量  explosive load
装药密度  charge density/ loading density
质量比  mass ratio
平行法  parallel plate configuration
角度法  preset angle configuration
均匀布药  average arranging explosive
梯形布药  gradient arranging explosive
爆炸焊参数  explosive welding parameters
初始参数  initial parameters
动态参数  dynamic parameters
界面参数  interface parameters
爆轰速度  detonation velocity
覆板速度  cladding plate velocity
碰撞点  impact point
碰撞点速度  velocity of the impact point
弯折角  bending angle
碰撞角  collision angle
碰撞压力  impact pressure
格尼能  Gurney energy
垂直碰撞  normal impact
倾斜碰撞  oblique impact/ inclined impact
对称碰撞  symmetrical impact
来流  upper stream
出流  down stream
再入射流  re-entrant jet
自清理  oneself cleaning
结合区  bond zone
平面结合  plane bond
波状结合  wave-like bond
界面波长  length of the interfacial wave
界面波幅  amplitude of the interfacial wave
熔化层  molten layer
熔化袋  molten pocket
雷管区  detonator zone
边界效应  edge effect
焊接性窗口  weldability windows
焊着率  ratio of welding area
内爆法  internal explosion process
外爆法  external explosion process
半圆柱试验法  semi-cylinder experiment method
超声波焊  ultrasonic welding (UW)
超声波点焊  ultrasonic spot welding
超声波缝焊  ultrasonic seam welding
超声波点焊机  ultrasonic spot welder
超声波缝焊机  ultrasonic seam welder
冷压焊  cold pressure welding (CPW)
热压焊  hot pressure welding
热轧焊  hot roll welding
旋弧压力焊  rotating arc pressure welding
埋弧压力焊  submerged arc pressure welding
电渣压力焊  electroslag pressure welding
气压焊  gas pressure welding
锻焊  forge-welding/ blacksmith welding
磁力脉冲焊  magnetic-pulse welding ( 焊接网 www.Hanjie.com
焊接网 WWW.HanJie.COM 版权所有